Attachments - Mezzanines

(Revised: 04/29/2015)

This screen is used to input the Geometry of a Mezzanine (elevated floor system).

Pricing is NOT automatically generated just by inputting the Mezzanine geometry in the software. Additional regional office assistance will still be required to generate complete building pricing inclusive of any floor beams, columns or bar joists, etc.

Mezzanine Classification:

Full Floor

If the mezzanine is across the whole shape, then click on this Radio Button.

Partial Floor

If the mezzanine is only in a specific part of the Shape, not the whole shape, then click on this Radio Button and enter the coordinates for the mezzanine.

„ Notes:

The coordinates always start from the origin of the main shape.

Secondary Orientation to First Line:

Perpendicular

Click on this Radio button if the Secondary (Mezzanine joists) is Perpendicular from the left end wall.

Parallel

Click on this Radio button if the Secondary (Mezzanine joists) is Parallel from the left end wall.

Mezzanine Outline:

List

For Partial Floors, define the X / Y coordinate points of each corner of the Mezzanine.

„ Notes:
1. The floor must be input clockwise, and the first and second side must create an outside corner.

Standard Controls:

§ OK, Cancel, Apply, Help

See also:

§ Attachments - Mezzanine Information

§ Attachments - Canopies

§ Attachments - Roof Extensions

§ Attachments - Partitions

§ Attachments - Facades