Warehouse
(Revised: 10/7/2022)

The Warehouse Parts screen is used to revise or add warehouse item(s).

Run will generate some parts in this list on each surface.

Data:

Warehouse List

Use the list to view or revise the secondary mark numbers or properties.

Revised: (Ref Only) "No" is not revised at this level, original results from Run.

Dimension: (Ref Only) Locates the part from the left edge of the surface.

Elevation: (Ref Only) Locates the part from the floor, ridge, or high eave of the surface.

Category: Select the Type of warehouse item.

„ Warning:

Must select Category 1^st or the screen will become not active.

Part: Select the Part number.

„ How to use:

Length can be revised on Variable Length Parts. (See "Variable Length Parts" below)

Description: If the Part Mark Number is not known, select the Description, Finish and Color. The Mark will be automatically selected.

Finish / Color: Select the Finish and Color.

„ How to use:

Finish & Color must be completed or else the part will not be saved in the list.

Qty: Quantity required.

„ How to use:

If a negative quantity is entered, this quantity will be subtracted from the total quantity of the part required on the entire job.
Negative quantities are represented on the overall quatity counts on the "Summary Parts List".

„ Warning:

A negative quantity will reduce the Price by the total quantity removed.

Note: Additional notes can be added to each warehouse part.

„ How to use:

Use the notes to help the checker located the usage of the part.

Sample: Add bolts for Façade Girt connections.

Insert a Row

Adds a row(s) of data to the list.

Delete a RowIDC_PANEL_PARTS_DELETE

Deletes the selected row(s) of data from the list.

Options:

SearchIDC_PANEL_PARTS_DELETE

Search is a great tool to quickly find a Warehouse Part based on the Mark Number, Category, or Description. Partial input in any of these fields will also return results. Only one field can be used at a time.

Select one Row or multiple Rows from the Search results and use the Insert button to add row(s) to Warehouse List.

PropertiesIDC_PANEL_PARTS_DELETE

Additional subunit locations for Welded Light Gage parts.

„ How to use:

On a Rake Extension Channels (REC-), the ECC1 clips are located in Properties.

Variable Length Parts:

When inserting some variable Trim or Gage pieces, you may get a warning that the “Pricing data not found”.

This is generally because the incorrect Finish & Color has been selected.

„ How to use:

To insert these variable length parts:

Select the Standard Part number from the list.

* Press Apply. *

Change the Part Number Length as required.

Enter in the quantity that is required in the “Qty” column.

Select Apply or OK.

Standard Controls:

§ View, OK, Cancel, Apply, Help