Secondary Data - Reset Erection Marks
(Revised: 10/29/11)

The Secondary Data - Erection Marks option will update all Mark Numbers on the Secondary Erection Drawings.

The Erection Marks are used to help reduce the time and confusion of sorting (shaking out) the secondary members at the job site.

Erection Marks:

The Erection Marks will continuously be updated when revisions are made to Secondary Member Data.

If a new Secondary Mark Number is created by inserting or revising data, a new Code / ID will be used.

If a Secondary Mark Number is deleted, it's Code / ID will be skipped automatically and the software will not reset all the other Erection Marks.

Reset

This will reset and renumber all the secondary Mark Numbers without skipping any numbers.

Warning: Reset will affect all drawings already plotted.

„ How to use:

When a large quantity of secondary members are deleted resulting in a large number of Erection Marks to be skipped, you may want to Reset the Erection Marks.

Otherwise, resetting the Erection Marks is not necessary.

Limitations:

The Erection Marks will not be used at some conditions:

Composite and Nested conditions.

Jamb Support Girts.

Secondary that has been inserted but not located.