Frame Locations
(Revision: 09/01/11)
The Frame Locations dialog
is used to set the Frame centerlines along Wall 4.
End Frames:
Left / Right Endframe
Select
the End Frame type desired.
The
location of the End Frames will be automated base on the Girt Depth and Offset
options selected on the Secondary Screen.
Interior Frame
Locations:
Space
Enter
the location of the interior frame center lines starting from the Left Edge.
There
are 2 methods that can be used…
OR…
Or
any combination of these methods…
Description
From
this drop list, select the Frame Type that you want to assign to this frame
description in the schedule.
Remaining Distance
Displays
the distance from the last interior frame location input to the right edge of
the Wall 4.
Total Length
Displays
the total length of Wall 4.
End Frame Offsets:
|
Outset Walls ·
Matches girt depth. ·
7" & 8 1/2" Girts - End frame is at 1'-0" ·
10" & 11 1/2" Girts - End frame is at 1'-3" |
|
|
Inset Walls ·
1 5/8" from Column Flange to BL ·
Inset Endwall - End frame is located at 6" from BL. |
|
|
Flush Walls ·
0" from Column Flange to BL. ·
Inset Endwall - End frame is located at 6" from BL. |
|
